WebPage copyright©
 Wecome Group



GCK(Ⅱ)-(XJG3 Rotary,BPT Trigger,DJG1-1G Rotary) Three-position Opeartion mechanism

Page view

GCK(Ⅱ)-(XJG3 Rotary,BPT Trigger,DJG1-1G Rotary) Three-position Opeartion mechanism

Overview GCK(Ⅱ)lowvoltageswitchgearcubicleissuitableforsystemwithAC50Hz,ratedworkingvoltageupto660V,currentupto4000A,andapplicableforpowergeneration,transmission,distribution,chanrge-overandconsumptio
I want to make an inquiry
product description
GCK(Ⅱ)low voltage switchgear cubicle is suitable for system with AC 50Hz,rated working voltage up to 660V,current up to 4000A,and applicable for power generation,transmission,distribution,chanrge-over and consumption equipment control.It conforms of relevant standrads such as IEC60439-1,GB7251.1 and JB/T9661 and are widely used in power plant,metallurgical factory,petroleum industry,chemical industry,textile industry and high-rise buildings.
Designed with advanced manufacturing technique and a modularized and flexible structure GCK(Ⅱ) can replace all traditional GCK solutions in the market.
Height x Width x Depth
2200mm 600mm 800/1000mm
  800mm 800/1000mm
  1000mm 800/1000mm
Structure instruction
The assembled cubicle has its framework made of C profiles. The top is wideopen and the horizontal busbar is placed at the top with the cover open or not.A rear door is provided with the outgoing at the rear,facilitating mounting and the drawer can use either XJG3(trigger three position opration mechanism) or BPT( rotary three position operation mechanism). The primary plug-in is of new type without valve, ensuring more dependability. The rated current of unit loop is up to 630A and 1/2 unit drawer can reach maximum current of 125A.The protection degress of the enclosure is IP4X
Main characteristics
1. The cubicle is of assembled structure,grids mounting,great versatility of parts and components,good applicability and high standardization level;
2. The effective height of drawer cabinet is 1800mm with module height of 200mm,300mm,400mm,500mm,600mm;
3. Cable compartment at the upper,apparatus compartment at the front and cable access compartment at the rear.Steel plates or insulating plates are added as partition between each compartment as to ensure safety ;
4. The door of drawer compartment has mechanical interlock with the operating handle of circuit breaker or disconnect switch,therefore, it is opened only when the handle is in breaking position;
5. Drawer(including 1/2 unit drawer)of MCC switchgear cubicle adpats mechanical three position interlock device(connect position,test position and disconnect position;
6. Reliable primary plug-in;
7. Material optional with galvanized cold rolled steel,galvanized steel or Aluminumzinc coated steel.
Corresponding parameter set not found, please add it in property template of background
Previous article
Next article